Automatic loading machine is a highly automated equipment, in order to ensure its normal operation and prolong the service life, need to carry out proper maintenance and maintenance. The following will introduce some common maintenance and maintenance measures.

　　1. Regular Cleaning: Regular cleaning is the key to keep the automatic feeding machine running normally. Dust, debris and residue on the surface and inside of the equipment need to be cleaned regularly. You can use a hoover, brush, cotton cloth and other tools to clean, pay special attention to cleaning the conveyor belt, feeding pipe and feeding port and other key parts.

　　2. Lubrication and maintenance: the transmission system, chain, bearings and other components in the automatic feeding machine need regular lubrication and maintenance. According to the frequency of use of the equipment and the manufacturer's recommendations, choose the appropriate lubricant and lubricate as required. Pay attention to regular replacement of lubricant or grease and check the wear and tear of lubricated parts.

　　3. Check the sensors and control system: automatic loading machine is usually equipped with various sensors and control systems for monitoring the status of the equipment and controlling the operation. The working condition of the sensors needs to be checked regularly to ensure their accuracy and sensitivity. At the same time, the control system should be checked to ensure its normal operation, no faults and no abnormal alarms.

　　4. Check and replace wearing parts: There are some wearing parts in the automatic loading machine, such as belts, rollers, motors and so on. Check these parts regularly to ensure their normal operation and durability. For wearing parts that are badly worn or damaged, they should be replaced in time to avoid any impact on the performance and reliability of the equipment.

　　5. Calibration and Adjustment: The accuracy and stability of the automatic loading machine is critical to the normal production process. Regular calibration and adjustment, including calibration of sensors, adjustment of feeding volume, calibration of the metering system. According to the needs and requirements of the equipment, you can refer to the instruction manual of the equipment or consult the manufacturer's guidance to carry out accurate calibration and adjustment work.

　　6. Training and operating procedures: In order to ensure the reliable operation and efficiency of the automatic feeding machine, the operator needs to receive professional training and be familiar with the operating procedures and reliable precautions of the equipment. Correct operation of the equipment and reasonable use and maintenance of the equipment will help to reduce the occurrence of failures and accidents.

　　7. Record and document management: Establish a record and document management system for equipment maintenance and servicing, which can track and record maintenance work and fault repair. This helps to identify problems in time, analyse the causes and provide relevant information to the manufacturer or maintenance personnel when needed.

　　Maintaining and servicing automatic loaders is an important step in ensuring their proper operation, improving productivity and extending their service life. Following the above measures can reduce breakdowns and damages and greatly maximise the performance and benefits of automatic loaders. In addition, regular contact and coordination with the manufacturer or supplier for professional support and service is also an important way to keep the equipment running properly.