Central feeding system preferred Dongguan Tongyi Plastic Machinery Manufacturing Co., Ltd. a, high efficiency: central feeding system can achieve a variety of raw materials automatically supplied to the multi-chamber any injection molding equipment, which can include drying of raw materials, colour matching processing, as well as proportional crushing of recycled materials to use, can implement a high degree of automation control, monitoring, etc., and to meet the needs of the production of 24 hours without downtime. The central feeding system can integrate various raw materials for centralised dehumidification and drying, colour matching, closed conveying and other processes. The structure design of one machine and one pipe effectively avoids the raw materials from damping and clogging, and ensures the stable operation of the system, which improves the working efficiency and ensures the quality of the products.

　　Second, energy saving: the central feeding system is easy to operate, only a few people can control the entire injection moulding factory's feeding demand, thus reducing a large number of labour costs. Secondly, it reduces the raw material belt and corresponding auxiliary equipments beside the injection moulding machine and improves the space utilisation. In addition, due to the use of centralised feeding, there is a corresponding reduction in the number of stand-alone equipment, which saves electricity and reduces maintenance costs.

　　Third, personalised: central feeding system can do different users, different workshop characteristics, different raw material requirements. Can be based on the actual needs to design the most optimal programme.

　　Fourth, the image of modern factory: central feeding system will make raw materials and dust on the injection moulding production pollution to the lowest degree, so as to maintain a clean production workshop, and central feeding system unique centralised dust recycling system, clean-up is more convenient, environmental protection effect is to achieve the 100,000 clean room operation requirements standard, and reduce noise, and ultimately unmanned automated production workshop can be realised to set up the image of modern factory management. Management of the image of modern factories.

　　1)：Up and down can be placed on the equipment, saving space.

　　2): Using this kind of backstop to feed the material more smoothly.

　　3): Small and beautiful, easy to install, good sealing performance.

　　4): It is easy to dismantle and connect to change the material, with good sealing performance.

　　5): Use pulsating dust collector to remove the dust in the drum easily.

　　6): for installation in the dryer hopper, can also be installed in the injection moulding machine, with the dryer and suction machine away from the separation, once the raw material conveying problem alarm light will send out an alarm, can troubleshoot in time.